This collection contains optic plates for the Glock 17 MOS. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the Glock 26 MOS, Glock 19 MOS, Glock 34 MOS and other Glock MOS models, see Optics ready plates for Glock 26 MOS, Optics ready plates for Glock 19 MOS, Optics ready plates for Glock 34 MOS and Optics ready plates for other Glock MOS models.
Footprints for the Glock 17 MOS
-
Trijicon RMR: plates from KMR and Eemann Tech.
-
Shield RMSc: plates from Eemann Tech, 2BME and Shield Sights.
-
Holosun K-series: plates from Eemann Tech and 2BME.
-
Leupold DPP: plates from KMR and 2BME.
-
Docter: plates from 2BME and Eemann Tech.
-
C-More RTS: a plate from Eemann Tech.
-
Aimpoint Acro: plates from KMR and 2BME.
-
Holosun 509T: plates from 2BME and Holosun.
Plates for several footprints
-
KMR: Shield RMSc and Holosun K-series.
-
Toni System type A: Shield RMSc, Leupold DPP and Docter.
-
Toni System type B: Trijicon RMR and C-More RTS.
The type letters differ between makers. Always read the footprints in the brackets.
Material
KMR and Eemann Tech make their plates from steel. 2BME, Toni System and Holosun make their plates from aluminium. An aluminium plate is lighter. A steel plate is heavier and robust.
Red dot without a plate
The Holosun SCS MOS and Vector Optics Frenzy 1x16x21 for Glock MOS fit the optic cut directly, without a plate.
Installation
Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.
All plates at a glance
| Plate |
Footprints |
Maker |
| Glock MOS plate |
Holosun K-series footprint, Shield RMSc footprint |
Eemann Tech |
| Red dot plate for Glock MOS |
Aimpoint Acro, Docter footprint, Holosun 509T footprint, Holosun EPS, Holosun K-series footprint, Leupold DPP footprint, Shield RMSc footprint |
2BME |
| Red dot plate for Glock MOS |
C-More RTS footprint, Docter footprint, Trijicon RMR footprint |
Eemann Tech |
| Red dot plate for Glock MOS |
Holosun 509T footprint |
Holosun |
| Red dot plate for Glock MOS |
Shield RMSc footprint |
Shield Sights |
| Red dot plate for Glock MOS |
type A [RMSc, DPP, Docter footprint], type B [RMR & RTS footprint] |
Toni System |
| Steel red dot plate for Glock MOS |
Aimpoint Acro footprint, Leupold DPP footprint, Shield RMSc & Holosun K-series footprint, Trijicon RMR footprint |
KMR |
For the Glock 17 without optic cut, see Red dot mounts for Glock 17. For iron sights, see Sights for Glock 17 MOS. For all plates of this brand, see Optics ready plates for Glock models.
Frequently asked questions
Can I install an optic plate on my Glock 17 MOS at home?
Yes. You need no gunsmith and no milling.
- Remove the cover plate from the optic cut.
- Screw the optic plate into the cut.
- Screw the red dot onto the plate.
Put a drop of threadlocker on every screw.
Which red dots will fit my Glock 17 MOS?
It depends on the plate you choose. For the Glock 17 MOS we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro and Holosun 509T footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.
Is there a red dot that fits without a plate?
Yes. The Holosun SCS MOS and Vector Optics Frenzy 1x16x21 for Glock MOS go straight into the optic cut.
My Glock 17 has no optic cut. What do I need?
A red dot mount instead of a plate. It goes into the rear sight dovetail in place of the rear sight. See Red dot mounts for Glock 17.
Sold out
Sold out
