Red dot mounts for CZ 75 SP-01

(8 products)

This collection contains red dot mounts for the CZ 75 SP-01. The mount goes into the rear sight dovetail in place of the rear sight. You fit a red dot without milling and without permanent changes, and you can put the rear sight back at any time. Every mount takes one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the CZ 75B, CZ 85, CZ 97 and CZ P01, CZ 75 Compact, see Red dot mounts for CZ 75B, CZ 85, CZ 97 and Red dot mounts for CZ P01, CZ 75 Compact.

Footprints for the CZ 75 SP-01

Trijicon RMR: a mount from EGW.
Shield RMSc: a mount from Zendl.
Docter: a mount from EGW.

Mounts for several footprints

Toni System type B: Trijicon RMR and C-More RTS.
Outer Impact type C: Trijicon RMR, Docter and C-More RTS.
Toni System type A: Shield RMSc, Leupold DPP and Docter.
EGW type S: Shield RMSc, Holosun K-series and Leupold DPP.
EGW: Shield RMSc and Leupold DPP.

The type letters differ between makers. Always read the footprints in the brackets.

Material

Toni System, Outer Impact and EGW make their mounts from aluminium. Zendl makes its mounts from steel. An aluminium mount is lighter. A steel mount is heavier and robust.

Installation

Drift the rear sight out of the dovetail with a sight pusher or a punch. Push the mount into the dovetail and fix it. Then screw the red dot onto the mount with a drop of threadlocker on each screw. See Installation tools.

All mounts at a glance

Mount	Footprints	Maker
CZ 75 [75B, 75 SP-01, P-01] red dot mount	Docter footprint, Shield RMSc footprint, Trijicon RMR footprint, type S [RMSc, DPP, K-series footprint]	EGW
CZ 75 [75B, 75 SP-01, P-01] red dot mount	Shield RMSc footprint	Zendl
CZ 75 [75B, 75 SP-01, P-01] red dot mount	type A [RMSc, DPP, Docter footprint], type B [RMR & RTS footprint]	Toni System
CZ 75 [75B, 75 SP-01, P-01] red dot mount	type C [RMR, RTS, Docter footprint]	Outer Impact

Which red dot for which footprint

Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.
Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.

For iron sights, see Sights for CZ 75 SP-01. For all mounts of this brand, see Red dot mounts for CZ models.

Frequently asked questions

Can I put a red dot on my CZ 75 SP-01 without an optic cut?

Yes. The mount goes into the rear sight dovetail in place of the rear sight. No milling and no permanent changes.

Can I install the mount at home?

Yes, if you have a sight pusher or a punch.

Drift the rear sight out of the dovetail.
Push the mount into the dovetail and tighten it.
Screw the red dot onto the mount with a drop of threadlocker on each screw.

Which red dots will fit?

It depends on the mount you choose. For the CZ 75 SP-01 we have mounts for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter and C-More RTS footprints. Find the footprint of your red dot in its specifications and take the mount that names it.