Optics ready plates for FB MPS

This collection contains optic plates for the FB MPS. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot.

Footprints for the FB MPS

• Trijicon RMR: a plate from 2BME.
• Shield RMSc: a plate from 2BME.

Material

2BME makes its plates from aluminium.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.

For all plates of this brand, see Optics ready plates for FB.

Frequently asked questions

Can I install an optic plate on my FB MPS at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my FB MPS?

It depends on the plate you choose. For the FB MPS we have plates for the Trijicon RMR and Shield RMSc footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.