Red dot adapters for Browning models

This collection brings together every red dot adapter we have for Browning models: optics ready plates for Browning models with a factory optic cut, and red dot mounts for Browning models without one. Pick your model above and you see only the plates or mounts that fit it.

Plate or mount: which one does your Browning model take

• Optics Ready Browning models have a factory optic cut in the slide, closed with a cover plate. They take an optics ready plate. The plate goes into the cut and connects it to the footprint of your red dot.
• Browning models without an optic cut take a red dot mount. The mount replaces the rear sight in its dovetail. You need no slide milling and no permanent modifications.

A mount does not fit an Optics Ready model, and a plate does not fit a model without the cut. Choose your exact model, including the Optics Ready (OR) or MOS part of its name.

Optics Ready Browning models

We have an optic plate for the Browning Buck Mark rimfire pistol. The plate fits the Buck Mark Plus, Buck Mark Lite and Buck Mark Standard variants. It mounts on the factory interface of the pistol and takes a red dot.

Footprints

The plate is an Outer Impact type C. It fits red dots with a Trijicon RMR, C-More RTS or Docter footprint. Outer Impact machines it from aluminium in the USA. If your red dot has another footprint, see Footprint adapters.

Installation

Screw the optic plate onto the factory interface of the pistol, then screw the red dot onto the plate. No milling is needed and you can do it yourself. Threadlocker on the screws is recommended.

Browning models without an optic cut

We have red dot mounts for Browning pistols and rifles.

• Browning Hi-Power: EGW mounts for the classic Hi-Power Vigilante (early models) with a narrower .275" (about 7.0 mm) rear dovetail. One for the Trijicon RMR, one type S for Shield RMSc, Leupold DPP and Holosun K-series. See Red dot mounts for Browning Hi-Power.
• Browning Bar: Toni System mounts that also fit the Benelli Argo and Winchester SXR. Type A for RMSc, DPP and Docter, type B for RMR and RTS. See Red dot mounts for Browning Bar.

The mounts replace the rear sight and need no permanent modifications. They are machined from aluminium.

For iron sights for the Hi-Power, see Sights for Browning models. For Picatinny rails for the Bar, see Picatinny rails for Browning models.

Related collections

For iron sights, see Sights for Browning models. For the tools you need, see Installation tools. For other brands, see Red dot adapters.

Frequently asked questions

Does the plate fit my Buck Mark?

Yes, if you have the Buck Mark Plus, Lite or Standard. The plate is made for these variants.

Can I install the plate on my Buck Mark at home?

Yes. No milling is needed, and you can do it yourself.

1. Screw the plate onto the factory mounting interface of your pistol.
2. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit?

Red dots with the Trijicon RMR, C-More RTS or Docter footprint. The Outer Impact type C plate takes all three. A Holosun 507C or an Olight Osight, for example, uses the RMR footprint.

Can I put a red dot on my Hi-Power?

Yes, on the early Hi-Power Vigilante with the .275" (about 7.0 mm) rear dovetail. The mount replaces the rear sight. No milling and no permanent changes.

Does the Hi-Power mount fit my later Hi-Power?

No. The later models have the wider .375" (about 9.5 mm) dovetail. Our Hi-Power mounts are made for the narrow one.